Pureest C2 Clay Lube Spray 500ml

Pureest C2 is our lubrication spray that should be used when treating the paintwork with Pureest C1, our clay also known as Clay Bar. This is to reduce the friction that arises from working with clay on the paint. The less friction, the better results and fewer scratches. What then is Clay Bar? When you have washed a car, there are particles that sit hard etched in the paint that do not go away through normal washing methods. Even if these are not visible to the naked eye, it greatly affects the process of polishing the car in that this dirt instead risks getting stuck in the polishing wheel and in the worst case inhibits the paint instead of making it shinier. By going directly on the paint with a clay bar, you can pick up dirt that previously could not be removed and thus prepare the car for polishing and paint protection as the final step. You will be shocked at how much dirt gets stuck in the clay! Important thing to remember is that the clay is the step before polishing and the paint will lose some shine after the clay. We recommend polishing the car immediately after using clay. Make sure the car is thoroughly clean. Spray C2 on both the clay and the paint to create the best glide possible. Then use the clay and work over the entire paint. Wipe off and start polishing. Both C1 and C2 are, of course, manufactured in Sweden.Colour: BlueScent: Grape Nozzle: Spray nozzle Dilution: This product can be diluted with water Remember not to store the product in areas where it will be below freezing.Other: None of our products contain PFAS (highly fluorinated substances)